Enable full-time protection in your Thinkware dash cam with the new Thinkware OBD-II Constant Power Cable! Once the cable is easily installed (simply "plug and play") into the vehicle's onboard diagnostic (OBD) port, your Thinkware dash cam will receive power at all times, even when your vehicle is off, so you can rest easy.

Easy Installation With No Hardwiring

The ODB-II power cable is designed for seamless integration, activating the full potential of your dash camera by enabling the built-in Parking Surveillance Mode. No need to mess with tedious panel removals and hardwiring. Simply plug the cable into your OBD-2 port and you're done!

Note on Hybrid and Electric Vehicles

Due to the significant powertrain differences of hybrid and electric cars and trucks as compared to traditional gas or diesel vehicles, this Thinkware cable is not likely to be 100% compatible with hybrid and full electric vehicles, therefore we do not recommend purchasing this cable for those types of vehicles (e.g. Chevy Volt, Tesla Model 3, Toyota Prius, etc). Should you wish to unlock Parking Mode functionality for Thinkware on an electric or hybrid car or truck, please install the dash cam using a Thinkware Direct-Wire Cable instead (sold separately)

4 Parking Modes!

The OBD cable allows for the activation of the Thinkware dash cam parking Mode, The unit will start after 2.5 minutes to allow for vehicles with stop/start technology.

Motion Detection

While in Motion Detection mode, your camera will automatically wake and began recording for 20 seconds any time motion is detected.

Impact Detection

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Time-Lapse Mode*

Time Lapse maximizes parking mode footage by reducing video file sizes. While in Time Lapse Mode the camera will record 2 frames per second with no audio resulting in a 10 minute period that is condensed into a 15-second video file.

Energy Saving Mode*

The dashcam will go to sleep and automatically wake up after an impact has been detected by built-in G-sensor and began recording for next 20 seconds.

*Available on Select Dash Cams

Compatible with the following Thinkware dashcams:

Thinkware F100
Thinkware F200
Thinkware F200 Pro Single
Thinkware F200 Pro Dual
Thinkware F70
Thinkware F750
Thinkware F770
Thinkware F800 Pro
Thinkware Q800 Pro Single
Thinkware Q800 Pro Dual
Thinkware U1000 Single
Thinkware U1000 Dual
Thinkware T700
Thinkware X330
Thinkware X350
Thinkware X550
Thinkware X700

* Not compatible with Thinkware F550 Dash Cam

DashCam Bros™ is an authorized distributor for Thinkware dash cams and accessories in the United States. Beware of unauthorized or grey-market third-party sellers!

Thinkware OBD-II Constant Power Parking Mode Cable

Have a question?